GB/T 23920-2009 三轮汽车和低速货车 最高车速测定方法

作者:标准资料网 时间:2024-05-21 07:54:38   浏览:9293   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:三轮汽车和低速货车 最高车速测定方法
英文名称:Tri-wheel vehicles and low-speed goods vehicles—Determination method of maximum speed
中标分类: 车辆 >> 专用汽车 >> 农、牧、副、渔用汽车
ICS分类: 农业 >> 农业机械、工具和设备
发布部门: 中国机械工业联合会
发布日期:2009-06-04
实施日期:2010-01-01
首发日期:2009-06-04
作废日期:
主管部门: 中国机械工业联合会
提出单位:中国机械工业联合会
归口单位: 全国农用运输车标准化技术委员会
起草单位:全国低速汽车标准化技术委员会(SAC/TC 234)
起草人:张琦、王侠民、林连华、王建军、翁里
出版社:中国标准出版社
出版日期:2010-01-01
页数:8页
计划单号:20072547-T-604
适用范围

本标准规定了三轮汽车和低速货车实际最高行驶速度的测定方法。
本标准适用于三轮汽车和低速货车(以下通称车辆)。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB18320-2008 三轮汽车和低速货车 安全技术要求

所属分类: 车辆 专用汽车 农 牧 副 渔用汽车 农业 农业机械 工具和设备
下载地址: 点击此处下载
Product Code:SAE AMS3045
Title:Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-to-Use
Issuing Committee:Ams K Non Destructive Methods And Processes Committee
Scope:This specification covers fluorescent magnetic particles in the form of a mixed, ready to use suspension in an odorless inspection oil vehicle.These particles have been used typically as the inspection medium in a wet method, magnetic inspection system as defined in ASTM E 1444, but usage is not limited to such application.【英文标准名称】:StandardSpecificationforMachineMade"Fiberglass"(Glass-Fiber-ReinforcedThermosettingResin)Flanges
【原文标准名称】:机制"纤维玻璃"(玻璃纤维增强的热固性树脂)法兰的标准规范
【标准号】:ASTMD4024-2005
【标准状态】:现行
【国别】:
【发布日期】:2005
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D20.23
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:建筑;树脂;法兰;塑料制品;塑料;热固性聚合物;增强塑料
【英文主题词】:centrifugally-cast;compression-molded;filament-wound;furan;machine-made;polyester;resin-transfer;viny-lest
【摘要】:1.1Thisspecificationcoversreinforced-thermosettingresinflangesotherthancontact-moldedflanges.Includedarerequirementsformaterials,workmanship,performance,anddimensions.1.2Flangesmaybeproducedintegrallywithapipeorfitting,maybeproducedwithasocketforadhesivebondingtoapipeorfitting,ormaybeofthetypeusedinconjunctionwitheitherametallicornonmetallicbackupring.1.3Thevaluesstatedininch-poundunitsaretoberegardedasthestandard.Thevaluesinparenthesesaregivenforinformationonly.Incaseswherematerials,products,orequipmentareavailableonlyinSIunits,inch-poundunitsareomitted.Thefollowingprecautionarycaveatpertainsonlytothetestmethodsportion,Section,ofthisspecification:Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.Note1ContactmoldedflangesarecoveredinSpecificationD5421andreferencedinSpecificationD5685.Note2ThereisnosimilarorequivalentISOstandard.
【中国标准分类号】:J15
【国际标准分类号】:23_040_60
【页数】:5P.;A4
【正文语种】: